FREE LOCAL DELIVERY OVER £40 throughout the NE

Joist Hangers , Timber Fasteners, Wall Starters and Wall Ties

Ancon Cavity Screw Tie
  • Ties in walls without toothing
  • Quick and easy to use
  • A drill bit is the only required tool
  • Provides lateral stability for brick, block and stone
  • Totally secure
  • For exterior and interior walls
  • Economic – no waste
  • Convenient to store and carry
  • Manufactured to British Standards
  • Approved to three storey or up to 8 metres
  • Includes Wall plugs and retaining discs
  • Stainless steel
£ 3.12
Ancon HRT4 S/S Housing Tie 200mm
Ancon HRT4 S/S Housing Tie 200mm
Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound) Tested as Type 4 (strength) to BS EN 845 S/Steel Housing Wall Ties 200mm x 2.5mm (Sold in Bundles of 250 and 50)
£ 43.80
Ancon HRT4 S/S Housing Tie 225mm
Ancon HRT4 S/S Housing Tie 225mm 
Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound) Tested as Type 4 (strength) to BS EN 845 S/Steel Housing Wall Ties 225mm x 2.8mm Type A (Sold in Bundles of 250 and 50)
£ 49.50
Ancon HRT4 S/S Housing Tie 250mm
Ancon HRT4 S/S Housing Tie 250mm
Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound) Tested as Type 4 (strength) to BS EN 845 S/Steel Housing Wall Ties 225mm x 2.8mm Type A (Sold in Bundles of 250 and 50)
£ 51.00
Ancon HRT4 S/S Housing Tie 275mm
Ancon HRT4 S/S Housing Tie 275mm
Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound) Tested as Type 4 (strength) to BS EN 845 S/Steel Housing Wall Ties 275mm x 2.5mm (Sold in Bundles of 250)
£ 51.00
Ancon Screw Tie
  • Ties in walls without toothing
  • Quick and easy to use
  • A drill bit is the only required tool
  • Provides lateral stability for brick, block and stone
  • Totally secure
  • For exterior and interior walls
  • Economic – no waste
  • Convenient to store and carry
  • Manufactured to British Standards
  • Approved to three storey or up to 8 metres
  • Includes Wall plugs for use with standard 8mm masonry drill
  • Stainless Steel
£ 1.44
Cable Ties Black 300mm
Cable Ties Black 300mm

Suitable for variety of applications such as cable binding or harnessing.
Internal serrations allowing for a positive hold onto cable and pipe bundles.

£ 7.08
Corner Brace
Corner Brace
Corner brace angle repair bracket. Yellow zinc plated steel. Available in 4 sizes.


£ 0.31
Galvanised Frame Cramp
Frame Cramp
Stainless steel, safety ended frame cramp used to join masonry to concrete or steel frames.
£ 0.54
Galvanised Nail Plate
Galvanised Nail Plate
103 x 152mm. A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre -punched holes. Plates must be fixed on both sides of the timber.
£ 1.31
Heavy Duty Angle Bracket
Heavy Duty Angle Bracket 
  • A multi-purpose fixing for most 90 degree connections, ideal for use on site for many substrates.
  • Adjustable, inexpensive and versatile with reinforced ribs for added strength.
  • Provision to fix using nails, bolts or screws.
£ 3.11
Heavy Duty Restraint Strap
Heavy Duty Restraint Strap
To provide restraint in housing and for heavy duty general purpose applications.
£ 3.68
Heavy Duty Twisted Strap
Heavy Duty Twisted Strap 
30 x 5mm x 800mm
£ 4.68
Heavy Face Fix Hanger 50mm
Heavy Face Fix Hanger 50mm
For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.
£ 4.15
Insulation Retaining Clips V28
Insulation Retaining Clips V28
Insulation Clip
£ 0.59
Masonry Joist Hanger

Simpson Masonry Joist Hanger

JHMs are one piece  non-welded joist hangers for supporting timber joists, beams and trussed rafters from masonry walls.
£ 3.54
S/S General Purpose Type EN2 Wall Tie 225mm
S/S General Purpose Type EN2 Wall Tie 225mm
Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. Tested as Type B (sound) Tested as Type 2 (strength) to BS EN 845-1 S/S General Purpose Type EN2 Wall Tie 225mm EN2 (bundle of 250 but sold in any quantity)
£ 0.20
S/S Movement Ties 200mm SPE/B20
S/S Movement Ties 200mm SPE/B20
SPE/B20 Safety Plain End Tie/BlankUsed over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). (Sleeve supplied as extra). S/S Movement Ties 200mm.
£ 0.88
Sleeves to suit movement ties
Sleeves to suit movement ties
Sleeves to suit movement ties
£ 0.19
Speedy Joist Hanger
Speedy Joist Hanger
Provides a quick and safe method of timber joist support and trimming for medium duty applications. 225mm maximum joist depth to be supported. Available in 50, 75 and 100mm joist widthsAll sizes are the same price
£ 3.84
Square Twist Nails
Square Twist Nails 
Sheradised square twist nails 30mm x 3mm available in 1kg bag and 25kg box.
£ 10.20
Timber Connector
Timber Connector
Double sided timber connector. 50mm diameter.
£ 0.71
Universal Wall Starter
Universal Wall Starter
The Universal Wall Starter is a quality engineered wall connector
system that has been developed for use with most brick and block
modules. This system has been designed for multi-purpose use where
reliability and durability are important requirements. It provides lateral
support to masonry wall panels in conversion, extension and new
building work.
£ 11.04